Rx580 fancontrol mac driver#
OpenRuntime.efi: essential driver to run macOS.OpenCanopy.efi: graphical picker with themes.CrScreenshotDxe.efi: Screenshots in OpenCore.SSDT-USBW: to wake from sleep with a single mouse or keyboard touch (this SSDT works with USBWakeFixup.kext) > very likely not needed if USB device in DeviceProperties has acpi-wake-type=01.SSDT-PMC: native NVRAM support on systems that lack it, for example Z390 chipsets.SSDT-PLUG: power management on Haswell and newer CPUs to configure the plugin-type=1 parameter on the first processor.SSDT-EC-USBX: fake Embedded Controller on Skylake and later, also fix USB power.SSDT-AWAC-DISABLE: to fix errors with system clock on Z390, B460, Z490 motherboards.With these 2 kexts (CPUFriendDataProvider.kext + CPUFriend.kext) the CPU shows correct power management and frequency drops to 800 MHz at system idle. For this reason, I have generated a CPUFriendDataProvider.kext extension from the CPUFriendFriend command to accompany CPUFriend.kext. RestrictEvents.kext to avoid RAM misconfiguration warnings.Īlthough the CPU is well detected with MacPro's SMBIOS, my guess is that it does not run at low frequency as often as it does with iMac19.1.SMBIOS model that works best on my Monterey system is MacPro7,1. These security options can be changed after installation as they do not appear to be necessary for Monterey to be run. Gatekeeper enabled ( sudo spctl -master-enable in Terminal).SIP enabled (csr-active-config=00000000 in ist).SecureBootModel=j160 or Default in ist (Apple secure boot corresponds to MacPro7,1 and Default sets the same model as in SMBIOS).For the installation to be successful, 3 parameters related to security must be set: I have used the latest OpenCore version, 0.7.6, with the same settings that I use for Big Sur. Integrated Graphics: Disabled / Enabled (according to SMBIOS).USB ports (USBMap.kext specific for this motherboard).Radeon RX580 (VDA decoder fully supported).Intel i7 9700 CPU (Intel UHD Graphics 630 iGPU).Gigabyte Z390 Aorus Elite motherboard: Realtek ALC1220 audio, Intel I219V Ethernet.This is a (short) guide using OpenCore 0.7.6.
Pretty much the same setup I use with Big Sur has worked for Monterey.
Updating a Big Sur system to Monterey has been easy and the new system works fine. Building a CustoMac Hackintosh: Buyer's Guide
0 kommentar(er)
